Large Aluminum Die Forgings
Open die Forging is commonly used for producing large, heavy, or complex-shaped parts, such as forged shafts, bars, rings, tubes, plates, discs, and some structural components.
Large Aluminum Die Forgings are used in a wide range of industries, including the aircraft, aerospace, automotive, architectural, appliance, military and defense, marine, petrochemical and process equipment industries.
Email: [email protected]
WhatsApp: 0086-18301953841
| FORGING | TYPE | MAX. WEIGHT | MAX. DIMENSION | ALLOY | STANDARD |
| Open die forging | Cube | ≤ 9t | Length ≤ 7000mm , Width ≤ 2000mm , Height ≤ 500mm | 2219、2618、2B50、2A50、2A70、2A80. 2D70、2A14、2014、2A11、2A12、2024、5A90、3A21、4032、5210、5A02、5A03、5083、5A05、5A06、6A02、6061、7A04、7B04、7A09、7075、7050、7A19、7A10 | GBn 223, YS/T 479, ASTM B247, AMS Standards |
| Disk | ≤ 5t | Diameter ≤ 2500mm | |||
| Ring / circle | ≤ 5t | Outer diameter of quenching parts ≤ 2500mm , Outer diameter of non-quenching parts ≤ 4000mm, Height ≤ 500mm | |||
| Cylinder | ≤ 5t | Outer diameter 200-800mm, Length ≤ 2000mm , Diameter 801-2000mm, Length ≤ 1500mm | |||
| Axle | ≤ 8t | Length ≤ 7000mm , Diameter ≤ 800mm | |||
| Backward Extrusion | Forged Pipe | Outer Diameter ≤ 830mm, Inner Diameter ≤ 650mm, Length ≤ 1800mm | |||
| Available Temper: 0、F、H112、T3、T4、T5、T6、T62、T652、T73、T74、T7452、T852 etc. | |||||
| American AA | Japan JIS | German CORUS | Britain DIN | France NF | Russian ГOCT | India IS | ISO | EN |
| BД17/1170 | ||||||||
| ГOCT4785-1974 | ||||||||
| Д16/1190 | ||||||||
| ГOCT4785-1974 | ||||||||
| B65/1165 | ||||||||
| ГOCT4785-1974 | ||||||||
| 2017/A92017 | A2017 | Д1/1110 | 24534 | AL Cu4MgSi | ||||
| AA/UNS | JIS H4000-1999 JIS H4040-1999 |
ГOCT4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | ||||
| 2024 | A2024 | AICuMg2/3.1355 | 2024(A-U4G1) | Д16/1160 | 24530 | AICu4Mg1 | EN AW-2024/AI Cu4Mg1 | |
| AA | JIS H4000-1999 JIS H4040-1999 |
DIN 1725-1-1986 | NF A50-411 NF A50-451 |
ГOCT4785-1974 | IS 5902 | ISO 209.1-1989 | EN 573-3-1994 | |
| 2219/A92219 | A2219 | Д20/1201 | AICu6Mn | EN AW-2219/AI Cu6Mn | ||||
| AA/UNS | JIS H4000-1999 JIS H4040-1999 |
ГOCT4785-1974 | ISO209.1-1989 | EN 573-3-1994 | ||||
| 2618/A92618 | A2618 | AK4-1/1141 | ||||||
| AA/UNS | JIS H4140-1988 | ГOCT4785-1974 | ||||||
| A2N01 | AK4/1140 | |||||||
| JIS H4140-1988 | ГOCT4785-1974 | |||||||
| 2018/A92018 | A2018 | AK2/1120 | ||||||
| AA/UNS | JIS H4140-1988 | ГOCT4785-1974 | ||||||
| 2011/A92011 | A2011 | AICuBiPb/3.1655 | 2011(FC1) | 2011(A-U5PbBi) | ～Д1/1110 | AI Cu6BiPb | EN AW-2011/AI Cu6BiPb | |
| AA/UNS | JIS H4040-1999 JIS H4080-1999 |
DIN 1725-1-1986 | BS 1470-1988 | NF 50-411 | ГOCT4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | |
| 2014/A92014 | A2014 | AICuSiMn/3.1655 | 2014(H15) | 2014(A-U4SG) | AK8/1380 | 24345 | AI Cu4SiMg | EN AW-2014/AI Cu4SiMg |
| AA/UNS | JIS H4000-1999 JIS H4040-1999 |
DIN 1725-1-1986 | BS 14710-1988 | NF A50-411 NF A50-451 |
ГOCT4785-1974 | IS733-2001 IS737-2001 |
ISO209.1-1989 | EN 573-3-1994 |
| 2014A | A2014A | AI Cu4SiMg(A) | EN AW-2014A/AI Cu4SiMg(A) | |||||
| AA | JIS H4100-1999 JIS H4040-1999 |
ISO 209.1-1989 | EN 573-3-1994 | |||||
| 2017A/A92017 | A2017A | AICuMg1/3.1325 | 2017A(A-U4G) | AK21/1120 | 24534 | AI Cu4MgSi(A) | EN AW-2017A/AI Cu4MgSi(A) | |
| AA/UNS | JIS H4040-1999 JIS H4080-1999 |
DIN 1725-1-1986 | NF A50-411 NF A50-451 |
ГOCT4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | |
| 2024/A92024 | A2024 | AICuMg2/3.1355 | 2024(A-U4G1) | Д16/1160 | 24530 | AI Cu4Mg1 | EN AW-2024/AI Cu4Mg1 | |
| AA/UNS | JIS H4100-1999 JIS H4040-1999 |
DIN 1725-1-1986 | NF A50-411 NF A50-451 |
ГOCT47785-1974 | ГOCT47785-1974 | IS 739-2001 | EN 573-3-1994 | |
| 2124/A92124 | Д16Л/1161 | EN AW-2124/AI Cu4Mg1(A) | ||||||
| AA/UNS | ГOCT4785-1974 | EN 573-3-1994 | ||||||
| 2117/A92117 | A2117 | AICu2.5Mg0.5/3.1305 | 2117(A-U2G) | AI Cu2.5Mg | EN AW-2117/AI Cu2.5Mg | |||
| AA/UNS | JIS H4040-1999 | DIN 1725-1-1986 | NFA50-451 | ISO 209.1-1989 | EN 573-3-1994 | |||
| 2214/A92214 | ～ AK8/1380 | EN AW-2214/AI Cu4SiMg(B) | ||||||
| AA/UNS | ГOCT4785-1974 | EN 573-3-1994 | ||||||
| 2218/A92218 | A2218 | 2218(A-U4N) | ||||||
| AA/UNS | JIS H4140-1988 | NF 50-411 | ||||||
| 2618/A92618 | A2618 | AK4-1/1141 | ||||||
| AA/UNS | JIS H4140-1988 | ГOCT 4785-1974 | ||||||
| 2001/A92001 | 2001(A-U6MT) | EN AW-2001/AI Cu5.5MgMn | ||||||
| AA/UNS | NF A50-101 | EN 573-3-1994 | ||||||
| 2007/A92007 | AICuMgPb/3.1645 | EN AW-2007/AI Cu4PbMgMn | ||||||
| AA/UNS | DIN 1725-1-1986 | EN 573-3-1994 | ||||||
| 5052/A95052 | A5052 | AIMg2.5/3.3523 | 5052(NS4) | 5052(A-G2.5C) | AMr2/1520 | AI Mg2.5 | EN AW-5052/AI Mg2.5 | |
| AA/UNS | JIS H4040-1999 JIS H4100-1988 |
DIN 1725.1-1986/W-Nr. | BS 1470-1988 | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | |
| 5154/A95154 | A5154 | 5154A(NS5) | 5154A(A-G3C) | AMr3/1530 | AI Mg3.5 | EN AW-5154A/AI Mg3.5(A) | ||
| AA/UNS | JIS H4000-1999 | BS 1470-1988 | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | ||
| 5456/A95456 | ～A5056 | AIMg5/3.3555 | 5056(A56S) | ～AMr5/1550 | AI Mg5Mn1 | ～EN AW-5019/AI Mg5 | ||
| AA/UNS | JIS H4040-1999 JIS H4080-1999 |
DIN 1725.1-1986/W-Nr. | BS 1470-1988 | ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | ||
| A5005 | AMr6/1560 | |||||||
| JIS H4040-1999 JIS H4100-1988 |
ГOCT 4785-1974 | |||||||
| 5005/A95005 | A5005 | 5005(N41) | 5005(A-G0.6) | AMr1/1510 | 51000-A | AI Mg1(B) | EN AW-5005/AI Mg1(B) | |
| AA/UNS | JIS H4040-1999 JIS H4100-1988 |
BS 1470-1988 | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | |
| 5019/A95019 | AIMg5/3.3555 | 5019(NB6) | AMr5/1550 | EN AW-5019/AI Mg5 | ||||
| AA/UNS | DIN 1725.1-1986/W-Nr. | BS 1470-1988 | ГOCT 4785-1974 | EN 573-3-1994 | ||||
| 5050/A95050 | AIMg1.5/3.3316 | 5050(2L44) | 5050(A-G1.5) | AMr1/1510 | 51000-B | AI Mg1.5(C) | EN AW-5050/AI Mg1.5(C) | |
| AA/UNS | DIN 1725.1-1986/W-N | BS 1470-1988 | NF A50-451 | ГOCT 4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | |
| 5052/A95052 | A5052 | AIMg2.5/3.3523 | 5052(2155) | 5052(A-G2.5C) | AMr2/1520 | AI Mg2.5 | EN AW-5052/AI Mg2.5 | |
| AA/UNS | JIS H4000-1988 | DIN 1725.1-1986/W-Nr. | BS “L” | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | |
| 5056A95056 | A5056 | AIMg5/3.3555 | 5056(NG6/2L58) | AMr5/1550 | AI Mg5Cr | EN AW-5056A/AI Mg5 | ||
| AA/UNS | JIS H4040-1999 JIS H4080-1999 |
DIN 1725.1-1986/W-Nr. | BS 1470-1988/BS “L” | ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | ||
| 5083/A95083 | A5083 | AIMg4.5Mn/3.3547 | 5083(NT8) | 5083(A-G4.5MC) | 54300 | AI Mg4.5Mn0.7 | EN AW-5083/AI Mg4.5Mn0.7 | |
| AA/UNS | JIS H4040-1999 JIS H4080-1999 |
DIN 1725.1-1986/W-Nr. | BS 1470-1988 | NF A50-411 NF A50-451 |
IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | |
| 5086/A95086 | A5086 | AIMg4Mn/3.3545 | 5086(A-G4MC) | AMr4/1540 | AI Mg4 | EN AW-5086/AI Mg4 | ||
| AA/UNS | JIS H4000-1999 JIS H4080-1999 |
DIN 1725.1-1986/W-Nr. | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | ||
| 5154/A95154 | A5154 | 5154(A-G3C) | AMr3/1530 | AI Mg3.5 | ||||
| AA/UNS | JIS H4040-1999 JIS H4100-1988 |
NF A50-411 NF A50-451 |
ГOCT 4785-1974 | ISO 209.1-1989 | ||||
| 5154A | 5154A(NS5) | 53000 | AI Mg3.5(A) | EN AW-5154A/AI Mg3.5(A) | ||||
| AA | BS 1470-1988 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | ||||
| 5182/A95182 | A5182 | AIMg5Mn/3.3549 | 5182(A-G4.5M) | EN AW-5182/AI Mg4.5Mn0.4 | ||||
| AA/UNS | JIS H4000-1999 | DIN 1725.1-1986/W-Nr. | NF A50-481 | EN 573-3-1994 | ||||
| 5183/A95183 | A5183 | AIMg4.5Mn/3.3547 | 5183(NG8) | (~A-G4.5MC) | AMr4.5 | AI Mg4.5Mn0.7(A) | EN AW-5183/AI Mg4.5Mn0.7(A) | |
| AA | JIS | CORUS | DIN | NF | ГOCT | IS | ISO | EN |
| 5251/A95251 | AIMg2Mn0.3/3.3525 |
251(N4/3L80)
5 |
5251(A-G2M) | AMr2/1520 | 52000 | AI Mg2 | EN AW-5251/AI Mg2 | |
| AA/UNS | DIN 1725.1-1986/W-Nr. | BS 1470-1988/BS “L” | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | |
| 5356/A95356 | A5356 | AI Mg5Cr(A) | EN AW-5356/AI Mg5Cr(A) | |||||
| AA/UNS | JIS Z3232-1986 | ISO 209.1-1989 | EN 573-3-1994 | |||||
| 5454/A95454 | A5454 | AIMg2.7Mn/3.3537 | 5454(N51) | 5454(A-G2.5MC) | AI Mg3Mn | EN AW-5454/AI Mg3Mn | ||
| AA/UNS | JIS H4040-1999 JIS H4100-1999 |
DIN 1725.1-1986/W-Nr. | BS 1470-1988 | NF A50-411 NF A50-451 |
ISO 209.1-1989 | EN 573-3-1994 | ||
| 5456/A5456 | ～AMr5/1550 | AI Mg5Mn1 | ～EN AW-5456A/AI Mg5Mn1(A) | |||||
| AA/UNS | ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | |||||
| 5554/A95554 | A5554 | 5554(N52) | AI Mg3Mn(A) | EN AW-5554/AI Mg3Mn(A) | ||||
| AA/UNS | JIS H4160-1994 | BS 1470-1988 | ISO 209.1-1989 | EN 573-3-1994 | ||||
| 5049/A95049 | AIMg2Mn0.8/3.3527 | 5049 | EN AW-5049/AI Mg2Mn0.8 | |||||
| AA/UNS | DIN 1725.1-1986/W-Nr. | NF A50-451 | EN 573-3-1994 | |||||
| 5556/A95556 | A5556 | 5556(N61) | 55380 | EN AW-5556A/AI Mg5Mn | ||||
| AA/UNS | JIS H33263-1992 | BS 1470-1988 | IS733-2001 IS737-2001 |
EN 573-3-1994 | ||||
| 5654/A95654 | A5654 | EN AW-5654/AI Mg3.5Cr | ||||||
| AA/UNS | JIS H4000-1988 | EN 573-3-1994 | ||||||
| ～6151 | A6165 | AISiMgCu/3.3214 | AB/1340 | |||||
| AA | JIS H4040-1999 JIS H4100-1999 |
DIN 1725.1-1986/W-Nr. | ГOCT 4785-1974 | |||||
| 6005/A96005 | AI SiMg | EN AW-6005/AI SiMg | ||||||
| AA/UNS | ISO 209.1-1989 | EN 573-3-1994 | ||||||
| 6005A | AIMgSi0.7/3.3210 | AI SiMg(A) | EN AW-6005A/AI SiMg(A) | |||||
| AA | DIN 1725.1-1986/W-Nr. | ISO 209.1-1989 | EN 573-3-1994 | |||||
| 6082/A96082 | AIMgSi1/3.2315 | 6082(A-SGM0.7) | AД35/1350 | 64430 | AI SiMgMn | EN AW-6082/AI SiMgMn | ||
| AA/UNS | DIN 1725.1-1986/W-Nr. | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | ||
| 6351/A96351 | AB/1340 | AI SiMg0.5Mn | EN AW-6351/AI SiMg0.5Mn | |||||
| AA/UNS | ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | |||||
| 6060/A96060 | AIMgSi0.5/3.3206 | 6060(A-GS) | AI MgSi | EN AW-6060/AI MgSi | ||||
| AA/UNS | DIN 1725.1-1986/W-Nr. | NF A50-411 | ISO 209.1-1989 | EN 573-3-1994 | ||||
| 6061/A96061 | A6061 | AIMgSi1Cu/3.3211 | 6061(N20/H20) | 6061(A-GSUC) | AД33/1330 | 65032 | AI Mg1SiCu | EN AW-6061/AI Mg1SiCu |
| AA/UNS | JIS H4040-1999 JIS H4000-1999 |
DIN 1725.1-1986/W-Nr. | BS 1470-1988 | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 |
| 6063/A96063 | A6063 | 6063(HT9) | (～A-GS) | AД31/1310 | 63400 | AI Mg0.7Si | EN AW-6063/AI Mg0.7Si | |
| AA/UNS | JIS H4040-1999 JIS H4100-1999 |
BS 1470-1988 | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | |
| 6063A | AI Mg0.7Si(A) | EN AW-6063A/AI Mg0.7Si(A) | ||||||
| AA | ISO 209.1-1989 | EN 573-3-1994 | ||||||
| 6101/A96101 | A6101 | ～E-AIMgSi0.5/3.3207 | E-AI MgSi | EN AW-6101/E-AI MgSi | ||||
| AA/UNS | JIS H4180-1990 | DIN 1725.1-1986/W-Nr. | ISO 209.1-1989 | EN 573-3-1994 | ||||
| 6101A | 6101A(E91E) | E-AI MgSi(A) | EN AW-6101A/E-AI MgSi(A) | |||||
| AA | BS 2898-1988 | ISO 209.1-1989 | EN 573-3-1994 | |||||
| 6081/A96081 | 6081(A-SGM0.3) | EN AW-6081/AI Si0.9MgMn | ||||||
| AA/UNS | NF A50-451 | EN 573-3-1994 | ||||||
| 6262/A96262 | 6262 | AI Mg1SiPb | EN AW-6262/AI Mg1SiPb | |||||
| AA/UNS | BS 2898-1988 | ISO 209.1-1989 | EN 573-3-1994 | |||||
| 6463/A96463 | 6463(91E/E6) | EN AW-6463/AI Mg0.7Si(B) | ||||||
| AA/UNS | BS 1474-1988 | EN 573-3-1994 | ||||||
| 7072/A97072 | A7072 | AI Zn1/3.4415 | Aц1 | EN AW-7072/AI Zn1 | ||||
| AA/UNS | JIS H4000-1999 | DIN 1725.1-1986/W-Nr. | ГOCT 4785-1974 | EN 573-3-1994 | ||||
| B94/1940 | ||||||||
| ГOCT 4785-1974 | ||||||||
| 7010/A97010 | 7010 | B95/1950 | AI Zn6MgCu | EN AW-7010/AI Zn6MgCu | ||||
| AA/UNS | BS 1470-1988 | ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | ||||
| 7005/A97005 | A7N01 | AцM | 74530 | AI Zn4.5Mg1.5Mn | EN AW-7005/AI Zn4.5Mg1.5Mn | |||
| AA/UNS | JIS H4080-1999 JIS H4000-1999 |
ГOCT 4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | |||
| ～7079 | ||||||||
| AA | ||||||||
| ～7017/A97017 | ≈1925 | |||||||
| AA/UNS | ГOCT 4785-1974 | |||||||
| 7003/A97003 | A7003 | EN AW-7003/AI Zn6Mg0.8Zr | ||||||
| AA/UNS | JIS H4040-1999 JIS H4100-1999 |
EN 573-3-1994 | ||||||
| 7005/A97005 | A7N01 | 74530 | AI Zn4.5Mg1.5Mn | EN AW-7005/AI Zn4.5Mg1.5Mn | ||||
| AA/UNS | JIS H4080-1999 JIS H4000-1999 |
IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 | ||||
| 7020/A9020 | AIZn4.5Mg1/3.4335 | 7020(A-Z5G) | ～1925C | AI Zn4.5Mg1 | EN AW-7020/AI Zn4.5Mg1 | |||
| AA/UNS | DIN 1725.1-1986/W-Nr. | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | ISO 209.1-1989 | EN 573-3-1994 | |||
| 7022/A97022 | AIZn1MgCu0.5/3.4345 | EN AW-7022/AI Zn5Mg3Cu | ||||||
| AA/UNS | DIN 1725.1-1986/W-Nr. | EN 573-3-1994 | ||||||
| 7050/A97050 | A7050 | AI Zn6CuMgZr | EN AW-7050/AI Zn6CuMgZr | |||||
| AA/UNS | JIS H4080-1999 JIS H4000-1999 |
DIN 1725.1-1986/W-Nr. | BS 1470-1988 | NF A50-411 NF A50-451 |
ГOCT 4785-1974 | IS733-2001 IS737-2001 |
ISO 209.1-1989 | EN 573-3-1994 |
| 7475/A9475 | AI Zn5.5MgCu(A) | EN AW-7475/AI Zn5.5MgCu(A) | ||||||
| AA/UNS | ISO 209.1-1989 | EN 573-3-1994 | ||||||
| 7010 | AI Zn6MgCu | EN AW-7010/AI Zn6MgCu | ||||||
| AA | ISO 209.1-1989 | EN 573-3-1994 | ||||||
| 7012 | EN AW-7012/AI Zn6Mg2Cu | |||||||
| AA | EN 573-3-1994 | |||||||
| 7049A | 7049A(A-Z8GU) | AI Zn8MgCu | EN AW-7049A/AI Zn8MgCu | |||||
| AA | NF A50-411 NF A50-451 |
ISO 209.1-1989 | EN 573-3-1994 | |||||
| 7178 | AI Zn7MgCu | EN AW-7178/AI Zn7MgCu | ||||||
| AA | ISO 209.1-1989 | EN 573-3-1994 |
