Super Alloy HASTELLOY C276
HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition. Alloy C-276 also has excellent resistance to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900°F. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.
HASTELLOY C276 in this grade in the following forms: Bar, hex bar, square bar, wire spool, wire cuts, loose coil, sheet, plate, coil , tube, pipe, nipple, elbow, fitting, coupling, flange, fasteners, forging, disk, machined.
Standard: ASTM B366, ASTM B574, ASTM B622, ASTM F467,DIN 2.4819, ASTM B575, ASTM B626, ASTM B619, ASTM F468
Product size can be customized according to customer needs.
Email: [email protected]
WhatsApp: 0086-18301953841
● Any type and size can be custom made.
● Minimum order quantity: from 10 kg
● Payment method: FOB Shanghai etc., CNY or USD
● Shipping method: sea, railway, air transport
● Packing: strong packaging
| Form | Standard |
| UNS | UNS N10276 |
|---|---|
| Bar | ASTM B574 Din 17752 |
| Wire | |
| Sheet | ASTM B575 Din 17750 |
| Plate | ASTM B575 Din 17750 |
| Fitting | ASTM B366 |
| Forging | ASTM B564 |
| Tube | ASTM B619 ASTM B622 ASTM B626 Din 17751 |
| Pipe | ASTM B619 ASTM B622 ASTM B626 Din 17751 |
| Weld Wire | A5.14 ERNiCrMo-4 |
| Weld Electrode | A5.11 ENiCrMo-4 |
| Din. | 2.4819 All Forms |
| Product Name | Monel / Hastelloy / INCOLOY Alloy | ||
| Type | Bar / Rod | Pipe /Tube | Plate/Sheet |
| Size | φ4-50mm;or as required Length:2000-12000mm |
φ6-273mm;δ1-30mm;or as required Length:1000-12000mm |
Width:40-3500mm,or as required Length:As Required |
| Standard | ASTM,JIS, AISI, GB, DIN, EN | ||
| Grade (ASTM UNS) |
Inconel: Inconel100,Inconel 600,Inconel 601,Inconel602CA Inconel 617, Inconel 625LCF, Inconel 686 Inconel 690 Inconel 718, Inconel 725, Inconel X-750 Hastelloy: Hastelloy B, Hastelloy B-2, Hastelloy B-3, Hastelloy C Hastelloy C-22, Hastelloy C-4, Hastelloy C-276 Hastelloy C-2000, Hastelloy G, Hastelloy G-3 Hastelloy G-35 Monel: Monel 400, Monel 401, Monel 404, Monel R405 Monel K-500 Nickel: Nickel 200, Nickel 201, Nickel 205 Nimonic: Nimonic 75, Nimonic 80A, Nimonic 90,Nimonic 105 Nimonic 115, Nimonic 901 Udimet: Udimet 188, Udimet 720, Udimet R41, Udimet 300 Haynes: Haynes 230, Haynes 556, Haynes 188 Incoloy: Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 825, Incoloy 925, Incoloy 926 GH: GH2132, GH3030, GH3039, GH3128, GH4180, GH3044 Alloy: Alloy 20/28/31; |
||
| Grade (EN) | 2.4060, 1.4980, 1.4529, 2.4460, 1.4563, 1.4886, 1.4876, 1.4876, 2.4858, 2.4816, 2.4851, 2.4856, 2.4856, 2.4668, 2.4669, 2.4360, 2.4375, 2.4819 | ||
| Surface | Bright, Polished, Pickling, Acid cleaning, Sandblasting | ||
| Technique | Cold Rolled Hot Rolled | ||
| Edge | Mill Edge / Slit Edge | ||
| Supply Ability | 5000 Ton/Tons per Month | ||
Chemical Requirements
| Ni | Cr | Mn | Mo | C | Si | Fe | |
|---|---|---|---|---|---|---|---|
| Max % | Bal. | 16.5 | 1.0 | 17.0 | 0.010 | 0.08 | 7.0 |
| Min % | 14.5 | 15.0 | 4.0 |
Mechanical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (@thickness 4.80-25.4 mm, 538°C/@thickness 0.189-1.00 in, 1000°F) | 601.2 MPa | 87200 psi |
| Yield strength (0.2% offset, @thickness 2.40 mm, 427°C/@thickness 0.0945 in, 801°F) | 204.8 MPa | 29700 psi |
| Elastic modulus (RT) | 205 GPa | 29700 ksi |
| Elongation at break (in 50.8 mm, @thickness 1.60-4.70 mm, 204°C/@thickness 0.0630-0.185 in, 399°F) | 56% | 56% |
| Hardness, Rockwell B (plate) | 87 | 87 |
Digesters and bleach plants in the paper industry.
Components exposed to sour gas.
Equipment for flue-gas desulfurisation plants.
Evaporators, heat exchangers, filters and mixers used in sulfuric acid environments.
Sulfuric acid reactors.
Organic chloride process equipment.
Equipment for processes utilizing halide or acid catalysts.
